Chemguard high expansion foam msds sheet

T-STORM SFFF foam concentrate is a low-, medium-, and high-expansion Class A fire control foam concentrate formulated from specialty hydrocarbon surfactants, stabilizers, and solvents. T-STORM SFFF foam solution is effective on many deep-seated Class A fires such as tire, paper, coal, and structure fires.

2% Hi Expansion Foam is a primary eye irritant, and contact with the eyes should be avoided. Users are advised to wear protective equipment. If C2 2% Hi Expansion Foam enters the eyes, flush them well with water and seek immediate medical attention. For further details, see the C2 2% Hi Expansion Foam Material Safety Data Sheet. 5. INspECTIoNs ... Chemguard C363 MSDS Page 1 of 6 MATERIAL SAFETY DATA SHEET Date Prepared: 06/14/2011 Supersedes Date: 05/28/2009 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Name: Chemguard 3% x 6% AR-AFFF C363 Chemical Family: Surfactant mixture. Product Use/Description: Fire-fighting foam concentrate, aqueous film forming foam

The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. Chemguard 2% High Expansion Foam Chemguard XTRA High Expansion Foam Concentrate is a synthetic based foaming agent suitable for use with either low, medium or high expansion foam generating equipment. It is generally proportioned at a 2% concentration (2 parts XTRA to 98 parts of water).

Chemguard 3%-6% AR-AFFF foam C-361 is a specially formulated, aqueous film forming free flowing viscous foam concentrate. It is a fire suppression foam that forms a vapor suppressing aqueous film on hydrocarbon type fuels or a polymeric membrane on polar solvent/water miscible type fuels. Depending on the type of hazard and its configuration, Portable High-Expansion Foam Generators may be used for total flooding applications involving three-dimensional hazards. The generators may also be used for local application on spill fires or for vapor suppression. Water damage is minimized when using high expansion foam. extinguishers. Foam. Fire Fighting Procedures: Keep people away. Isolate fire and deny unnecessary entry. Soak thoroughly with water to cool and prevent re-ignition. If material is molten, do not apply direct water stream. Use fine water spray or foam. Cool surroundings with water to localize fire zone. Hand held MSDS Sheet Datasheet . This 1% Chemguard AFFF is a specially formulated, synthetic, aqueous film forming foam concentrate. A vapor suppressing aqueous film is formed by the foam solution draining from the expanded foam blanket. CHEMGUARD DEEPATTACK Concentrate is designed in accordance with National Fire Protection Association (NFPA) 11 Standard for Low-, Medium-, and High-Expansion Foam, and NFPA 18 Standard on Wetting Agents. The concentrate is approved, listed, qualified under, or meets the requirements of the following specifications and standards: